Innovative synthesis of drug-like molecules using tetrazole as core building blocks

• Jingyao Li,
• Ajay L. Chandgude,
• Qiang Zheng and
• Alexander Dömling

Beilstein J. Org. Chem. 2024, 20, 950–958, doi:10.3762/bjoc.20.85

• EtOH under refluxing overnight conditions which provides the desired 1H-tetrazole with an acceptable yield of 31%. Noteworthy, only two syntheses of 6 are described in the literature [28][29]. Both methods use dangerous, explosive and toxic hydrazoic acid in a sequential multistep synthesis. In

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

Design, synthesis, and evaluation of chiral thiophosphorus acids as organocatalysts

• Karen R. Winters and
• Jean-Luc Montchamp

Beilstein J. Org. Chem. 2022, 18, 1471–1478, doi:10.3762/bjoc.18.154

• -syntheses that are required [1][2][3][4]. Additionally, whereas either enantiomer of BINOL is relatively inexpensive (109 $/mol), it is not the case with SPINOL (17,000 $/mol), and VAPOL is not commercially available. Although one could synthesize these precursors as well, this multistep synthesis is time

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• [37]. Based on this method, herein we report on the complete multistep synthesis of new sodium 3,4,5-tris(3-chlorophenyl)-1,2-diphosphacyclopentadienide and corresponding 1,2-diphosphaferrocene with meta-chlorophenyl substituents and the influence of the position of the Cl atom on aryl moiety on the

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• synthesis. This report reviews the combination of flow chemistry and inductive heating in industrial settings as well as academic research and demonstrates that the two technologies ideally complement each other. Keywords: catalysis; enabling technologies; flow chemistry; inductive heating; multistep

• synthesis; nanoparticles; Introduction Several decades ago, inductive heating was introduced as an indirect technique in various applications, including industrial manufacturing, synthetic chemistry [1][2][3], and medicine (Figure 1) [4][5][6][7]. Compared to microwave heating [8][9], the other major

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• glycosylation or complicating the deprotection steps. Orthogonality and stability become particularly crucial when the goal is the multistep synthesis of long COS. Other glucosamine-based polysaccharides Other polymers of glucosamine based on the β(1–3) or β(1–6) linkages exist, but have gained less synthetic

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• ][23][24][25][26][27]. As such our aim is not to include a comprehensive review here but to simply highlight the principle characteristics and direct the reader to the listed references for further consultation. In overview a basic depiction of a sequential batch vs flow approach for a multistep

• synthesis is shown in Figure 5. In the batch process, multiple discreet steps and reaction vessels are required each often associated with an accompanying work-up stage (and purification). Industrial syntheses often face lengthy, economically arduous synthetic operations that require an extended labour

• also proved the possibility to perform an in situ hydrogenation of 86 by mixing the resin with a Pd catalyst (50% Amberlyst® 15/2% Pd on silica/alumina). The desired material was indeed obtained with high yields (up to 80%) and selectivity (up to 95%) [124]. In 2013, a continuous-flow multistep

DNA with zwitterionic and negatively charged phosphate modifications: Formation of DNA triplexes, duplexes and cell uptake studies

• Yongdong Su,
• Maitsetseg Bayarjargal,
• Tracy K. Hale and
• Vyacheslav V. Filichev

Beilstein J. Org. Chem. 2021, 17, 749–761, doi:10.3762/bjoc.17.65

• ) have an enhanced thermal stability in DNA triplexes and duplexes, a high binding affinity to RNA, and are nuclease resistant [22][26][27][28]. These properties have led to LNA (BNA) being used in various therapeutic ONs that have reached clinical trials [29]. However, the multistep synthesis of LNA and

Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• application in organic electronics. Results and Discussion Synthesis of N-alkylated S,N-heterotetracene 9 by Pd-catalyzed amination. Asymmetric S,N-heterotetracene Hex-SN4 9 comprises the sequence of heteroatoms ‘SSNS’ in the tetracyclic conjugated π-system [37]. In a multistep synthesis, 2,6

• -heterotetracene system SN4'' comprising the heteroatom sequence ‘SNNS’ is built-up by annulation of two ‘outer’ thiophene and two ‘inner’ pyrrole rings resulting in the symmetric sequence of heteroatoms in the tetracyclic conjugated π-system. The multistep synthesis of Pr-SN4'' 33 started from 2

Microwave-assisted efficient one-pot synthesis of N²-(tetrazol-5-yl)-6-aryl/heteroaryl-5,6-dihydro-1,3,5-triazine-2,4-diamines

• Moustafa Sherief Moustafa,
• Ramadan Ahmed Mekheimer,
• Saleh Mohammed Al-Mousawi,
• Mohamed Abd-Elmonem,
• Hesham El-Zorba,
• Afaf Mohamed Abdel Hameed,
• Tahany Mahmoud Mohamed and
• Kamal Usef Sadek

Beilstein J. Org. Chem. 2020, 16, 1706–1712, doi:10.3762/bjoc.16.142

• a multistep synthesis route. A first approach relied on the nucleophilic substitution of chlorine in cyanuric chloride with Grignard reagents, ammonia or amines [25][26], which suffered from the high reactivity of the Grignard reagents that prevents further functionalization. Moreover, this protocol

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• (126). Then, reaction of 127 (1.0 mmol) with 1.5/1.0 equiv of diethylaluminum cyanide (Et2AlCN)/iPrOH at −78 °C in THF gave nitrile 128. Deprotection of the latter, followed by hydrolysis of the nitrile group afforded syn-(2S,3S)-(+)-3-fluorophenylalanine (129) [65] (Scheme 28) . 2.3. Multistep

• synthesis from ethyl trifluoropyruvate hemiketal The reaction of ethyl trifluoropyruvate hemiketal 130 with thionyl chloride in pyridine afforded the chlorinated derivative 131, which upon treatment with zinc powder in DMF, afforded the dihalogenated olefin 132. The substitution of one fluorine atom in 132

Design and synthesis of diazine-based panobinostat analogues for HDAC8 inhibition

• Sivaraman Balasubramaniam,
• Sajith Vijayan,
• Liam V. Goldman,
• Xavier A. May,
• Kyra Dodson,
• Sweta Adhikari,
• Fatima Rivas,
• Davita L. Watkins and
• Shana V. Stoddard

Beilstein J. Org. Chem. 2020, 16, 628–637, doi:10.3762/bjoc.16.59

• developing single agent therapeutic hydroxamate derivatives, we began the synthesis of four leading HDAC8 diazine-based HDACis: TOI1, TOI2, TOI3-rev and TOI4 (Figure 1). Herein, we provide a summary of the design process followed by an outline of the multistep synthesis and preliminary biological evaluation

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• ], and borylation [32]), has been in great demand recently rather than the conventional multistep synthesis with nucleophilic substitution/cross-coupling via halogenation of BODIPYs [33] or from the activated precursors [34] via unstable pyrrolic intermediates. In particular, halogenation (e.g

Understanding the role of active site residues in CotB2 catalysis using a cluster model

• Keren Raz,
• Ronja Driller,
• Thomas Brück,
• Bernhard Loll and
• Dan T. Major

Beilstein J. Org. Chem. 2020, 16, 50–59, doi:10.3762/bjoc.16.7

• , Dept. of Chemistry, Technical University of Munich (TUM), Lichtenbergstr. 4, 85748 Garching, Germany 10.3762/bjoc.16.7 Abstract Terpene cyclases are responsible for the initial cyclization cascade in the multistep synthesis of a large number of terpenes. CotB2 is a diterpene cyclase from Streptomyces

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

• N-(1-phenylethyl)aziridine-2-methanols 7 Aziridine alcohols 7 are usually prepared by LiAlH4 reduction of the corresponding esters 5 [22][35][36] although a milder method with a NaBH4 and LiCl mixture was also elaborated [37]. A multistep synthesis of (2S,1'R)-7 employing the aziridine ring closure

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• preparation, efficient multistep synthesis routes with good overall yields based on recently published transition metal-catalyzed C–S and C–Se coupling/cyclization reactions in the crucial cyclization steps of iodinated bithiophene and biselenophene precursors. Heterotriacenes 1–4 turned out to be stable and

Mechanochemistry of supramolecules

• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2019, 15, 881–900, doi:10.3762/bjoc.15.86

• liberation of undesired byproducts [34][35]. In literature, classical small organic molecules’ synthesis has been well explored which includes multistep synthesis [36][37][38][39]. However, the concept of supramolecular chemistry under mechano-milling conditions only has limited number of examples [40][41

Synthesis of a novel category of pseudo-peptides using an Ugi three-component reaction of levulinic acid as bifunctional substrate, amines, and amino acid-based isocyanides

• Maryam Khalesi,
• Azim Ziyaei Halimehjani and
• Jürgen Martens

Beilstein J. Org. Chem. 2019, 15, 852–857, doi:10.3762/bjoc.15.82

• ; multicomponent; pseudo-peptides; Ugi reaction; Introduction The multistep synthesis of complex molecules normally requires a large number of repetitive synthetic operations, such as extraction, separation, chromatography and other purification steps. These disadvantages encouraged chemists to synthesize complex

Synthesis of nonracemic hydroxyglutamic acids

• Dorota G. Piotrowska,
• Iwona E. Głowacka,
• Andrzej E. Wróblewski and
• Liwia Lubowiecka

Beilstein J. Org. Chem. 2019, 15, 236–255, doi:10.3762/bjoc.15.22

• of the alkaloid hemerocallisamine skeleton [37], its tert-butyl counterpart was used as a starting material in a multistep synthesis of a functionalized exo-methylenecyclopentane skeleton as an entecavir intermediate [116]. On the other hand, the stereospecific alkylation of methyl (2R,4R)-4

Ruthenium-based olefin metathesis catalysts with monodentate unsymmetrical NHC ligands

• Veronica Paradiso,
• Chiara Costabile and
• Fabia Grisi

Beilstein J. Org. Chem. 2018, 14, 3122–3149, doi:10.3762/bjoc.14.292

• metathesis of 96 (Table 4, entries 8 and 9, respectively). Indeed, the one-step multicomponent synthesis of unsaturated unsymmetrical NHCs could provide a cost-effective alternative to the multistep synthesis of their saturated counterparts [36]. The catalyst 85 was identified as the catalyst of choice for

Enhanced single-isomer separation and pseudoenantiomer resolution of new primary rim heterobifunctionalized α-cyclodextrin derivatives

• Iveta Tichá,
• Gábor Benkovics,
• Milo Malanga and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2018, 14, 2829–2837, doi:10.3762/bjoc.14.261

• indirect method generally led to selectively homobifunctionalized CDs. In contrast, heterobifunctionalized CDs have been prepared via multistep synthesis (depending on the steric hindrance of the moiety on the CD scaffold and on the bulkiness of reagents [22]) or by modification of homobifunctionalized CDs

Molecular iodine-catalyzed one-pot multicomponent synthesis of 5-amino-4-(arylselanyl)-1H-pyrazoles

• Camila S. Pires,
• Daniela H. de Oliveira,
• Maria R. B. Pontel,
• Jean C. Kazmierczak,
• Roberta Cargnelutti,
• Diego Alves,
• Raquel G. Jacob and
• Ricardo F. Schumacher

Beilstein J. Org. Chem. 2018, 14, 2789–2798, doi:10.3762/bjoc.14.256

• /direct selanylation is a practical and economical way to incorporate organylselanyl moieties in aryl and heteroaryl compounds avoiding the necessity of pre-functionalization, multistep synthesis and tedious work-up [4][5]. In this context, the preparation of diverse selanylated indoles and

Microwave-assisted synthesis of biologically relevant steroidal 17-exo-pyrazol-5'-ones from a norpregnene precursor by a side-chain elongation/heterocyclization sequence

• Gergő Mótyán,
• László Mérai,
• Márton Attila Kiss,
• Zsuzsanna Schelz,
• Izabella Sinka,
• István Zupkó and
• Éva Frank

Beilstein J. Org. Chem. 2018, 14, 2589–2596, doi:10.3762/bjoc.14.236

• . This indicates that the pyrazolone heterocyclic ring at the 17β position is a promising scaffold for the design of anticancer agents of the Δ5 androstene series. 1H NMR spectra of compound 7f in CDCl3 (top; # solvent signal) and in DMSO-d6 (bottom; # solvent signal). Multistep synthesis of steroidal β

Assessing the possibilities of designing a unified multistep continuous flow synthesis platform

• Mrityunjay K. Sharma,
• Roopashri B. Acharya,
• Chinmay A. Shukla and
• Amol A. Kulkarni

Beilstein J. Org. Chem. 2018, 14, 1917–1936, doi:10.3762/bjoc.14.166

• unified flow synthesis platform that can facilitate multistep synthesis involving a wider range of reactions over a varied range of conditions. Such a platform would help to reduce the time in planning of experimental set-ups for individual reaction(s) or sequences and will also help to do a seamless

• of the challenges are as follows: A varied range of conditions: A multistep synthesis platform developed for one target molecule cannot always be utilized for different products since each product either requires different chemistry or a different set of unit operations or unit operation sequences

• /solvents/byproducts. Even the change in the sequence should be adaptable such a system can be very expensive as well. Skills: With the advent of many flow synthesis tools available in the market much of the above issues may be taken care of. However, the automation in multistep synthesis needs careful

One hundred years of benzotropone chemistry

• Arif Dastan,
• Haydar Kilic and
• Nurullah Saracoglu

Beilstein J. Org. Chem. 2018, 14, 1120–1180, doi:10.3762/bjoc.14.98

• the dibromides 24 and 25 are the result of the addition of HBr, which is formed under the reaction conditions. 2.1.2. Multistep synthesis of 4,5-benzotropone (11): The first multistep synthesis for 4,5-benzotropone (11) is the original procedure described by Thiele, Schneider, and Weitz, which

• rather than the 1,2-double bond to 1-methoxynaphthalene (310). The position of the halogen substituent in 311 and 312 was also determined by the cycloadducts 320 and 321 between 5-halo-2,3-benzotropones and maleic anhydride (Figure 14) [185][187]. 6.1.2. Multistep synthesis via dihalocarbene addition: As